Now open to non-executive and advisory board roles. to board roles.Boards & advisory
  1. Home
  2. Insights
  3. Lead generation
Lead generation

How to Get B2B Clients When Nobody Knows Your Name Yet

To get B2B clients with no reputation yet, work in this order: people who already know you, then one paid channel aimed at the person who signs, then outbound only when you have a specific reason to approach a specific firm. Most firms attempt that list backwards and run out of money proving it.

By Stephen EllulPublished 30 Oct 20267 min read
How to Get B2B Clients When Nobody Knows Your Name Yet cover

How to get B2B clients is a question I have answered badly in the past. For a long time my answer was a channel, usually whichever one had worked most recently, and that answer is close to useless to a firm with no pipeline at all. The channel is the last decision, not the first.

What follows is the order I would work in if I were starting again tomorrow with no name, no case studies and a budget that matters. It is deliberately boring at the top and only gets clever at the bottom.

How do you get B2B clients when nobody knows you?

Start with people who already know you, then add one paid channel aimed at the person who signs, then add outbound only when you have a specific reason to contact a specific firm. The sequence matters more than the tactics, because each stage produces the proof the next stage needs.

That is the whole structure. The reason it works in that order is evidential rather than philosophical. Your first clients buy you, your second wave buys your first clients, and your outbound only lands once you can say something true and specific about both.

Why should your first clients come from people who already know you?

Because trust is the expensive part of a B2B sale and you cannot advertise your way to it from zero. People who already know how you work will take a chance on an unproven firm. Strangers reasonably will not, and the cost of persuading them is highest in exactly the month you can least afford it.

This is not the same as asking friends for favours. It is a methodical pass through former colleagues, former clients, suppliers, people you have sat on committees with, and anyone who has watched you do the work. The ask is narrow and specific: one named kind of problem, for one named kind of firm, and a direct question about whether they know anyone facing it this quarter.

Two things make this pass work rather than feel awkward. Say exactly what you do in a single sentence that a non-specialist could repeat, and make the ask small enough to be answered in one reply. Vague enthusiasm produces vague goodwill. A specific ask produces introductions.

When should you start paying for leads?

Once you have two or three engagements you can describe honestly and a rough sense of what one client is worth over a year. Paid media buys attention, not credibility, so it converts far better once you have something concrete to point at and a number that tells you what a lead can cost.

Before that point paid advertising is tuition. You can certainly afford to learn, but learn with a small budget and a narrow target rather than a broad campaign and a hopeful message. The mistake I see most often is a firm with no proof spending in a crowded category on the assumption that volume substitutes for a reason to care.

Which paid channel should a small B2B firm start with?

One, chosen by where the person who signs the cheque actually spends attention, and run for at least a quarter before you judge it. Running two channels on a small budget usually means running neither properly, because neither accumulates enough data to optimise and both get blamed.

In practice the shortlist is short. Search works when your buyer already types the problem into a search engine, which is true for defined, budgeted problems and false for anything the market has no word for yet. Paid social works when the buyer is identifiable by role or firm and you have something worth interrupting them with. Those two cover most small B2B firms, and the honest answer is usually obvious once you ask whether anyone is searching.

The criteria I would apply, in this order:

  • Is the buyer searching? If yes, search first. Captured intent is cheaper than created intent.
  • Can you name the buyer by role and company size? If yes, paid social becomes workable.
  • What is one client worth in a year? This sets what a lead may cost, and therefore whether the channel is viable at all.
  • Can you produce something worth clicking every month? If not, pick the channel that needs less creative.

Whatever you pick, aim the message at the decision maker rather than at the researcher who will be told to collect three quotes. The targeting mechanics of that are covered on thegrowthbully.com.

Does cold outreach still work for getting B2B clients?

Only with a reason, and the reason has to be specific to the firm you are writing to. Generic cold email at volume has stopped producing for us, and I have written about why at some length. Outreach with a genuine trigger and a narrow list still works, because it reads as attention rather than as a campaign.

I want to be precise about this, because it is where my own view changed. We ran volume outbound for a long time and eventually stopped, and the full account of what broke and what we kept is in /insights/why-we-stopped-cold-email. The short version is that the economics of sending more collapsed while the economics of sending better did not.

A trigger is something that happened at that firm which makes the conversation timely. A funding round, a new hire into a relevant role, a product launch, an office opening, a visible gap in how they currently handle the thing you do. If you cannot name one, you are not doing outreach, you are doing volume, and volume is the part that stopped working.

How many conversations does it take to win one B2B client?

More than feels reasonable, and the only honest answer is the one your own numbers give you after a quarter. Track conversations held, proposals sent and deals won from the first week, however small the figures are. Without that ratio you cannot tell whether your pipeline is thin or your pitch is weak.

Those are different problems with opposite fixes. A thin pipeline with a decent win rate means you need more conversations, so spend on reach. A busy pipeline with a poor win rate means more conversations will only waste more time, and the work is in qualification and in what you actually propose. Most firms diagnose this wrongly and buy leads to fix a positioning problem.

What should you not do while getting your first B2B clients?

Do not build a channel portfolio before you have a repeatable sale, do not discount to win logos you will resent, and do not wait for the website or the brand to be finished before you talk to anybody. Each of those feels like progress and delays the only thing that produces evidence.

The discount one is worth dwelling on. A first client won on price sets the anchor for every renewal and every referral they make, and B2B referrals travel with the price attached. Narrow the scope instead. A smaller piece of work at your real rate is a far better first engagement than a large one at a rate you cannot repeat.

If you want the version of this aimed at the local market, the /insights/b2b-marketing-malta piece covers what changes in a small country, and /insights/b2b-appointment-setting-malta covers the meeting-booking layer specifically.

Where does this leave you?

With a sequence rather than a channel. Work the people who know you until that well runs dry, use the proof it produces to make one paid channel viable, and add outbound only when you can say something specific to a named firm. It is slower than picking a tactic on Monday, and it compounds.

Frequently Asked Questions

How do I get my first B2B client with no portfolio?

Go to people who already know how you work: former colleagues, former employers, suppliers, anyone who has watched you deliver. Make the ask narrow, naming one problem and one kind of firm, so it can be answered in a single reply. Trust substitutes for a portfolio at this stage, and nothing else does.

How long does it take to get B2B clients from a standing start?

Expect one full sales cycle before anything closes, which in most B2B categories means two to three months rather than weeks. Referral-led work closes fastest because trust is already in place. Paid and outbound both need the cycle plus enough volume to be read as a pattern rather than as luck.

Is paid advertising or cold outreach better for getting B2B clients?

Paid advertising is better when your buyer already searches for the problem or can be named by role and company size. Outreach is better when your market is small enough to list by hand and you have a genuine trigger for each firm. Neither works well as a first move with no proof to point at.

How much should a small B2B firm spend to get clients?

Work backwards from what one client is worth over a year, then decide what you can afford to pay for a qualified conversation. Without that figure any budget is arbitrary, and most overspending I see comes from choosing a monthly number first and discovering the economics afterwards.

Should I target one industry or stay broad when looking for B2B clients?

Pick one narrow enough that you can say something specific in the first sentence. A narrow focus makes referrals easier to pass on, makes paid targeting cheaper, and makes outreach legible. You can widen later from a position of proof, which is far easier than narrowing from a position of noise.

Read next

Lead generation

B2B Appointment Setting in Malta: Buy a System, Not a Caller

Malta businesses buy appointment setting as a person: a caller, a VA, an offshore SDR. The ones that win buy a system they own. Here is the difference, and the maths behind it.

21 Aug 2026 · 8 min read
Lead generation

B2B Marketing in Malta: How to Grow in a Small, Tight-Knit Market

B2B marketing in Malta is a different game. Everyone knows everyone, cold outreach backfires, and word of mouth dominates. Here is what actually works for B2B growth in Malta.

21 Aug 2026 · 5 min read
Lead generation

How to Work Out What a Customer Is Worth When You Only Have Twenty of Them

To calculate customer lifetime value, multiply what a customer pays you per period by the number of periods they stay, then multiply by your gross margin. With a small client list you have no reliable churn rate, so use observed retention, the median rather than the average, and a deliberately short lifespan. Under about thirty customers it is a planning figure, not a measurement.

21 Nov 2026 · 7 min read

Book 30 minutes.

I'll look at where your leads come from today and tell you straight whether I can help.

Rather build it yourself? The 30-Day Pipeline™ walks you through it in your own accounts.

The Meta ads checklist

The checks I run on every new account before spending a euro.

Check your inbox. The checklist is on its way.