Ask why are my Google Ads not getting impressions and you will be handed the same ten item checklist every time. Review pending. Budget too low. Bids too low. Ad rank. Low search volume. Negative keyword conflict. Scheduling. Location targeting. All true, all in no particular order, and none of it tells you the thing you actually want to know, which is whether something is broken or whether zero is simply the right number for what you asked for.
That distinction matters more than the checklist. In a market the size of Malta, I have opened accounts where a campaign had served nothing in four days and the account was working perfectly. I have also opened accounts where a single toggle had been silently suppressing delivery for a month. The symptom was identical.
So this is a triage rather than a list. Three questions, in order, and you stop at the first one that answers.
Is the campaign live and approved?
Check the four states that stop delivery outright before you touch a bid. Campaign and ad group both enabled, not paused. Ads approved rather than under review or disapproved. Payment method valid with no failed charge. Campaign start date in the past and end date not behind you. Any one of these produces exactly zero, not merely few.
The two that catch people repeatedly are review status and billing. A new account can sit under review for a day or two, and a declined card suspends the account without a warning anyone notices. Both are fixed in minutes, which is why they go first.
The other state worth reading is the keyword status itself. Google will label a keyword as eligible, below first page bid, low search volume or paused, and those four words are the whole diagnosis. A keyword marked low search volume is not being throttled, it has been switched off because Google believes almost nobody searches it.
Is anyone searching those terms at all?
This is the question the checklists skip, and in small markets it is usually the answer. If your keyword is a tight exact match phrase with a local qualifier, the real monthly search volume may be in single figures. Zero impressions on a Tuesday is then not a fault, it is arithmetic.
There are two quick ways to tell. Open the keyword planner and look at the forecast for the exact terms you added rather than the broad topic. Then check the keyword status column for the low search volume label. If the planner shows a handful of searches a month and the status says low search volume, your campaign is not broken, it is too narrow to serve.
The mistake that follows is raising the bid. Bidding more on a query nobody typed changes nothing, and it will quietly raise your cost the week somebody does type it. The fix for an empty query is a wider query, which is a different action entirely.
Is the bid or budget starving it?
If the campaign is live and the terms do get searched, you are being outranked or outspent rather than blocked. The signals are specific: search impression share near zero, a below first page bid flag on your keywords, or a limited by budget note on the campaign. Those three say delivery is possible and you are losing the auction.
Treat bid and budget as separate problems. A below first page bid means your maximum bid is under the price of entry for that auction, so you never enter it. Limited by budget means you are entering and then running out, which usually shows as impressions that arrive early in the day and then stop. The first needs a higher bid or a cheaper keyword. The second needs a higher daily budget or fewer keywords sharing it.
One more cause sits underneath both and is easy to miss. If a smart bidding strategy is set to a target cost per acquisition the account has never achieved, the system will choose to serve almost nothing rather than miss the target. Loosening the target, or moving to manual bidding for a week, will tell you whether the bidding strategy was the constraint.
What is suppressing delivery when everything looks correct?
Four settings suppress delivery while leaving every status green, and all four are worth a sixty second check. Location targeting set to a radius that excludes your customers. An ad schedule limiting delivery to hours nobody searches. A negative keyword at campaign or shared list level cancelling your own keyword. An audience exclusion applied account wide and forgotten.
The negative keyword conflict is the sneakiest of the four, because the keyword still reads as eligible. Google provides a conflicting negatives report that finds it in one click, and running it is faster than reasoning about it. Match types are the usual source of the conflict, and the mechanics of how the three types actually behave are set out in keyword match types.
How do you tell a fault from a correct outcome?
Apply one test: would a real person, in your targeted area, typing your keyword today, have been able to see your ad? If the answer is yes and they did not, you have a fault. If the answer is that nobody typed it, you have a reach problem, and no amount of account surgery will fix a reach problem.
That test is why the order of the three questions matters. Faults are cheap to fix and produce zero. Reach problems are expensive to fix and also produce zero. Checking in the wrong order means you spend a week raising bids on a disapproved advert, or rebuilding a campaign that was simply too narrow.
Should you raise the bid or widen the keyword?
Widen first, almost always. If the terms you chose are not being searched, a higher bid buys nothing. Moving the same keyword from exact to phrase match, adding the two or three ways people actually phrase the problem, and dropping an over specific qualifier will produce traffic that a bid increase cannot.
Do it deliberately rather than by switching everything to broad. Add the wider variants as their own ad group so you can see what they bring in, keep the exact match terms running alongside, and let the search terms report tell you which phrasings are real. For a local service business this is usually the single highest value change available, and the wider setup is covered in Google Ads for local business.
If widening still produces nothing worth having, the honest conclusion is that there is not enough active search demand in your market to run a search campaign on, and the budget belongs on a channel that creates demand instead of harvesting it. That trade off is the subject of Google Ads versus Facebook Ads.
How long should you wait before changing anything?
Give a new campaign three to four days before diagnosing anything beyond the hard stops, and change one thing at a time after that. Reviews clear, learning settles, and daily budgets smooth out over roughly that window. Changing a bid, a budget and a match type on one afternoon leaves no way to know which worked.
The exception is the first list in this article. Approval, billing, start date and paused status are not things to wait out. Check those within an hour of launch, every time, and you will never lose a week to one of them. The equivalent diagnosis on the Meta side, where the symptom looks the same but the causes are different, is in Meta ads not spending.
Frequently Asked Questions
Why are my Google Ads approved but not showing?
Approval only means the advert is permitted, not that it is competitive or eligible to serve. The usual causes are a bid below the first page threshold, a daily budget exhausted early, location or schedule targeting that excludes the searcher, or a keyword marked low search volume. Check the keyword status column first.
How long does it take for Google Ads to start getting impressions?
Usually within a few hours of approval, and approval itself normally completes inside one business day. If nothing has served after three to four days, treat it as a fault rather than a delay and work through campaign status, billing, keyword status and impression share in that order.
What does low search volume mean in Google Ads?
It means Google has recorded so few searches for that exact keyword that it has stopped serving it rather than throttled it. The keyword is inactive, not expensive. Raising the bid has no effect. The fix is a broader match type or wider phrasings that real people actually type.
Can zero impressions ever be the correct result?
Yes, and in small markets it often is. A tight exact match keyword with a local qualifier may genuinely attract single figure monthly searches, so a quiet few days means nothing went wrong. Confirm it with the keyword planner forecast for your exact terms before changing any settings.
Should I raise my bid if I am getting no impressions?
Only when the keyword status shows below first page bid or impression share is near zero on terms that do get searched. If the keyword is flagged low search volume, a higher bid buys nothing and will cost you more later. Widen the keyword instead of paying more for an empty auction.



