Now open to non-executive and advisory board roles. to board roles.Boards & advisory
  1. Home
  2. Insights
  3. Google ads
Google ads

What Is a Good Conversion Rate for Google Ads, and Why the Benchmarks Disagree

There is no portable answer to what is a good conversion rate for Google Ads, because a conversion rate is only comparable when the conversion action and the denominator match. Audit what your own account is counting first, then set a target from your allowable cost per sale rather than from any published industry table.

By Stephen EllulPublished 11 Nov 20266 min read
What Is a Good Conversion Rate for Google Ads, and Why the Benchmarks Disagree cover

Search for what is a good conversion rate for Google Ads and you will get a number on the first page. Then a different number on the second result, a range on the third, and a top-quartile figure on the fourth that is roughly triple the first one. They cannot all be right, and the reason they disagree is not sampling error.

Not one of those pages tells you what counted as a conversion in the figure it quotes. That is the whole problem. I am deliberately not going to repeat their numbers here, because reproducing a benchmark whose definition is unstated just moves the error one page further along.

A conversion rate is a fraction. Both halves of it are decisions somebody made in a settings screen, and two accounts in the same industry can make those decisions so differently that the resulting percentages have nothing to do with each other.

Why do the published Google Ads conversion rate benchmarks disagree?

Because each one aggregates accounts that counted different things. One dataset is full of accounts counting newsletter signups and phone-number clicks. Another is full of ecommerce accounts counting completed purchases. A third mixes both and reports the mean. The industry label on the table hides all of it.

There is a second, quieter reason. The denominator moves too. A conversion rate measured against clicks is not the same number as one measured against sessions, and neither matches one measured against impressions. Change nothing about the business and you can print three different conversion rates for the same month.

So when a benchmark says a figure for your sector, the honest reading is that some set of accounts, counting some set of actions, against some denominator, averaged out at that. It is a fact about a spreadsheet, not about your account.

What counts as a conversion in your account?

Open the conversions table and read every row with the primary action column visible. You are looking for how many distinct actions are counted as one number, and whether any are things a person does without deciding anything. Most accounts I audit are counting between three and eight actions, and treating the total as if it were sales.

Four kinds of row cause almost all of the inflation:

  1. Micro actions counted as primary. Page views on a contact page, scroll depth, time on site, outbound link clicks. Each one is somebody who has not asked you for anything.
  2. Phone-number clicks with no call behind them. A tap on a mobile number is a conversion in the interface and an unanswered ring in reality.
  3. Form views rather than form submissions. This one is usually an implementation error and it can double a conversion rate overnight.
  4. The same sale counted twice. A thank-you page conversion and a purchase event both firing, or a lead form and a booking both counted for one person.

Deduplicate that list down to the one action that means somebody asked to buy, mark everything else secondary, and your conversion rate will fall. That drop is not a problem. It is the first honest number the account has produced.

What is a good conversion rate for Google Ads, then?

The useful answer is the rate at which your cost per conversion sits inside what a customer is worth to you. Expressed as a percentage, a good rate for a high-value service with a long sales cycle can be a small fraction of a good rate for a low-value ecommerce product, and both accounts can be healthy.

That is why the question keeps producing arguments. Two things that are genuinely comparable are your own account against its own trailing ninety days, and your own account against its own allowable cost per sale. Everything else is a different business with a different definition.

If you want the version of this argument for cost rather than rate, I made it about lead costs in Meta ads cost per lead benchmarks, and the conclusion is the same: the published figure is an average of accounts that are not yours.

How do you set your own conversion rate target?

Work backwards from money. Take the average value of a closed customer, decide what share of it you are willing to spend to acquire one, and divide that allowable cost by your current cost per click. The result is the conversion rate you need. Anything above it is profitable, anything below it is not.

That calculation does three things a benchmark cannot. It gives you a number that is true for your margins. It tells you immediately whether the gap is a landing page problem or a traffic problem. And it stops the conversation about whether four percent is good, because the only thing that matters is whether four percent clears your own threshold.

The full method for getting the customer value side of that right, including why most firms use revenue where they should use margin, is in how to measure marketing ROI.

Why is my Google Ads conversion rate low?

Usually because of the match between intent and offer, not because of the landing page design. A campaign on broad research terms will always convert at a fraction of one on terms containing your service and a buying word, and no amount of page optimisation closes that gap. Check the search terms report before you change anything visual.

After intent, the order I work in is tracking, then offer, then page. Tracking first, because a broken or duplicated setup makes every other diagnosis meaningless. Offer second, because the thing you are asking for decides more than the words around it: a request for a quote converts differently from a request for a call, which converts differently from a download. The page itself is third, and it is the one everybody starts with.

Local service accounts have their own version of this, where the conversion is a phone call that never appears in the interface. That one is covered in Google Ads for local business.

What should you fix first?

The measurement. Not because it is the biggest lever, but because every other decision depends on it being right, and a conversion rate built on duplicated or inflated actions will send you to optimise the wrong campaign for a quarter.

Then set the allowable cost per sale, get your current rate honestly, and compare the two. If you want a practical checklist for the tracking side, including what survives consent banners and browser changes, I wrote the mechanics up at conversion tracking that survives.

Frequently Asked Questions

What is the average conversion rate for Google Ads?

Published averages for Google Ads disagree with each other, often by a factor of two or three, because each dataset aggregates accounts that counted different actions as conversions against different denominators. Treat any single figure as a fact about that dataset rather than a target. Your own trailing ninety days is the only comparable baseline.

Is a 2% conversion rate good for Google Ads?

It depends entirely on your cost per click and what a customer is worth. Two percent is excellent for a high-value service where one sale pays for hundreds of clicks, and poor for a low-margin product with expensive traffic. Divide your allowable cost per sale by your cost per click to get your own threshold.

How do I calculate my Google Ads conversion rate?

Divide conversions by clicks for the same date range and campaign scope, then check that the conversions column contains only the one action that means somebody asked to buy. If several actions are marked primary, the rate is a blend of unrelated behaviours and is not comparable to anything, including your own earlier months.

Why did my conversion rate drop after fixing tracking?

Because the earlier number was counting things that were not sales, such as form views, phone-number taps or the same purchase recorded twice. A fall after deduplication is the account becoming accurate rather than the performance worsening. Rebaseline from the fix date and do not compare across it.

Should I use a conversion rate or a cost per conversion target?

Cost per conversion, because it carries the price of the traffic with it. A conversion rate can rise while the business loses money if the clicks got more expensive faster than the rate improved. Use cost per conversion to govern the budget, and the conversion rate to diagnose where the funnel is leaking.

Read next

Google ads

Google Ads for Local Businesses: A Practical Guide

Everything local businesses need to know about Google Ads: campaign types, targeting, budgets, and when it works better than Meta.

21 Aug 2026 · 9 min read
Google ads

Google Ads Offline Conversion Uploads in Malta: The 7-Day Attribution Gate in 2026

Google Ads quietly documented a seven-day gate on offline conversion uploads. Late uploads still appear in standard reports but never reach data-driven attribution or Smart Bidding. Here is what it means for Malta advertisers and how to fix it.

8 Sept 2026 · 10 min read
Google ads

Google Ads Customer Lifecycle Optimization: The 2026 Malta Guide

Google Ads now lets Smart Bidding value new, lapsed and loyal customers differently. Here is what Customer Lifecycle Optimization means for Malta advertisers in 2026, how to set it up, and where it breaks.

4 Sept 2026 · 9 min read

Book 30 minutes.

I'll look at where your leads come from today and tell you straight whether I can help.

Rather build it yourself? The 30-Day Pipeline™ walks you through it in your own accounts.

The Meta ads checklist

The checks I run on every new account before spending a euro.

Check your inbox. The checklist is on its way.